Have you ever looked out at your lawn and thought, “sure would be nice to water less often, reduce the need to fertilize, and spend less time mowing”? Well, we’ve got the program for you! Our new program – Lawns Reimagined – assists landowners in installing a more resilient lawn to reduce water and fertilizer use, and cut down on mowing frequency during the growing season.

Lawns Reimagined is a new program provided through a partnership between the Dakota SWCD, Dakota County, and the Vermillion River Watershed Joint Powers Organization. The goal of the program is to create healthy looking lawns using deeper rooted grasses that are more resilient to weather conditions and climate change while maintaining traditional turfgrass lawn uses.

These lawns will be composed of fescue grass blends that require little to no watering or fertilizer post-establishment; reducing the impact lawns have on the groundwater supply and decreasing nutrient loss to waterbodies through runoff and lawn clippings. It is recommended to reduce mowing frequency which results in reduced carbon emissions from lawn mowers and healthier air at a local level.

The Dakota SWCD will be hosting two workshops for Dakota County residents:
* June 5 in Apple Valley (Municipal Center) at 6 p.m.
* June 12 in Rosemount (Steeple Center) at 6 p.m.

At the workshops, participants will learn about the benefits of an alternative lawn type, along with technical guidance on site preparation, seeding, and long-term maintenance. From there, landowners can apply to receive further assistance. Once applicants have been approved, SWCD staff complete a site visit to further guide site preparation, seeding, and answer any additional questions. Landowners then complete the site preparation and Dakota SWCD will provide landowners with the seed to complete a fall seeding. If the participants are willing to do a little work, the cost to them will be minimal to none!

For more details and to sign up for the workshop, check out the Lawns Reimagined webpage!

Have you ever looked out at your lawn and thought, “sure would be nice to water less often, reduce the need to fertilize, and spend less time mowing”? Well, we’ve got the program for you! Our new program – Lawns Reimagined – assists landowners in installing a more resilient lawn to reduce water and fertilizer use, and cut down on mowing frequency during the growing season.

Lawns Reimagined is a new program provided through a partnership between the Dakota SWCD, Dakota County, and the Vermillion River Watershed Joint Powers Organization. The goal of the program is to create healthy looking lawns using deeper rooted grasses that are more resilient to weather conditions and climate change while maintaining traditional turfgrass lawn uses.

These lawns will be composed of fescue grass blends that require little to no watering or fertilizer post-establishment; reducing the impact lawns have on the groundwater supply and decreasing nutrient loss to waterbodies through runoff and lawn clippings. It is recommended to reduce mowing frequency which results in reduced carbon emissions from lawn mowers and healthier air at a local level.

The Dakota SWCD will be hosting two workshops for Dakota County residents:
* June 5 in Apple Valley (Municipal Center) at 6 p.m.
* June 12 in Rosemount (Steeple Center) at 6 p.m.

At the workshops, participants will learn about the benefits of an alternative lawn type, along with technical guidance on site preparation, seeding, and long-term maintenance. From there, landowners can apply to receive further assistance. Once applicants have been approved, SWCD staff complete a site visit to further guide site preparation, seeding, and answer any additional questions. Landowners then complete the site preparation and Dakota SWCD will provide landowners with the seed to complete a fall seeding. If the participants are willing to do a little work, the cost to them will be minimal to none!

For more details and to sign up for the workshop, check out the Lawns Reimagined webpage!

Dakota County, the Dakota County Soil and Water Conservation District, and the Minnesota Agricultural Water Resource Center will be offering farmers who irrigate their crops the opportunity to test their irrigation water for nitrogen. Testing is at no cost.

Participants will receive their results the same day. They will learn how to credit nitrate in their irrigation water for next year’s nutrient management plans. Participants will also walk through the Irrigation Management Assistant (IMA) Tool with a SWCD staff member. The tool helps with irrigation scheduling.

Private well owners can also have their drinking water tested for nitrate. They will receive their results and treatment recommendations, if applicable.

Sampling instructions for irrigators

Samples may be taken the day of analysis or ahead of time. Samples taken ahead of time must be frozen until attending a session to prevent samples from degrading.

Participants may bring in several frozen samples collected over a period of several days to get a more representative result.

Samples can be collected directly from irrigators or by installing a boiler drain to a pivot point or the well itself.

If sampling directly from irrigators:

• Allow irrigators to pump water for at least 15 minutes before sampling.
• Fill a clean 5-gallon bucket, or similar container. Mix before collecting the sample.
• Collect the test sample in a small Ziploc bag or a clean bottle or container. Only about 1 ounce of water is needed for testing.

Test results

Nitrogen results are confidential. Participants are not required to take any action after testing. They will receive their results and information on nitrogen crediting.​

Dakota County, the Dakota County Soil and Water Conservation District and the Minnesota Agricultural Water Resource Center will be offering farmers who irrigate their crops the opportunity to test their irrigation water for nitrogen. Testing is at no cost.

Participants will receive their results the same day. They will learn how to credit nitrate in their irrigation water for next year’s nutrient management plans. Participants will also walk through the Irrigation Management Assistant (IMA) Tool with a SWCD staff member. The tool helps with irrigation scheduling.

Private well owners can also have their drinking water tested for nitrate. They will receive their results and treatment recommendations, if applicable.

Sampling instructions for irrigators

Samples may be taken the day of analysis or ahead of time. Samples taken ahead of time must be frozen until attending a session to prevent samples from degrading.

Participants may bring in several frozen samples collected over a period of several days to get a more representative result.

Samples can be collected directly from irrigators or by installing a boiler drain to a pivot point or the well itself.

If sampling directly from irrigators:

• Allow irrigators to pump water for at least 15 minutes before sampling.
• Fill a clean 5-gallon bucket, or similar container. Mix before collecting the sample.
• Collect the test sample in a small Ziploc bag or a clean bottle or container. Only about 1 ounce of water is needed for testing.

Test results

Nitrogen results are confidential. Participants are not required to take any action after testing. They will receive their results and information on nitrogen crediting.​

Dakota County, the Dakota County Soil and Water Conservation District and the Minnesota Agricultural Water Resource Center will be offering farmers who irrigate their crops the opportunity to test their irrigation water for nitrogen. Testing is at no cost.

Participants will receive their results the same day. They will learn how to credit nitrate in their irrigation water for next year’s nutrient management plans. Participants will also walk through the Irrigation Management Assistant (IMA) Tool with a SWCD staff member. The tool helps with irrigation scheduling.

Private well owners can also have their drinking water tested for nitrate. They will receive their results and treatment recommendations, if applicable.

Sampling instructions for irrigators

Samples may be taken the day of analysis or ahead of time. Samples taken ahead of time must be frozen until attending a session to prevent samples from degrading.

Participants may bring in several frozen samples collected over a period of several days to get a more representative result.

Samples can be collected directly from irrigators or by installing a boiler drain to a pivot point or the well itself.

If sampling directly from irrigators:

• Allow irrigators to pump water for at least 15 minutes before sampling.
• Fill a clean 5-gallon bucket, or similar container. Mix before collecting the sample.
• Collect the test sample in a small Ziploc bag or a clean bottle or container. Only about 1 ounce of water is needed for testing.

Test results

Nitrogen results are confidential. Participants are not required to take any action after testing. They will receive their results and information on nitrogen crediting.​

Dakota County, the Dakota County Soil and Water Conservation District and the Minnesota Agricultural Water Resource Center will be offering farmers who irrigate their crops the opportunity to test their irrigation water for nitrogen. Testing is at no cost.

Participants will receive their results the same day. They will learn how to credit nitrate in their irrigation water for next year’s nutrient management plans. Participants will also walk through the Irrigation Management Assistant (IMA) Tool with a SWCD staff member. The tool helps with irrigation scheduling.

Private well owners can also have their drinking water tested for nitrate. They will receive their results and treatment recommendations, if applicable.

Sampling instructions for irrigators

Samples may be taken the day of analysis or ahead of time. Samples taken ahead of time must be frozen until attending a session to prevent samples from degrading.

Participants may bring in several frozen samples collected over a period of several days to get a more representative result.

Samples can be collected directly from irrigators or by installing a boiler drain to a pivot point or the well itself.

If sampling directly from irrigators:

• Allow irrigators to pump water for at least 15 minutes before sampling.
• Fill a clean 5-gallon bucket, or similar container. Mix before collecting the sample.
• Collect the test sample in a small Ziploc bag or a clean bottle or container. Only about 1 ounce of water is needed for testing.

Test results

Nitrogen results are confidential. Participants are not required to take any action after testing. They will receive their results and information on nitrogen crediting.​

Minnesota Pollution Control Agency’s (MPCA) Smart Salting training helps improve salt effectiveness and reduces chloride pollution. It also keeps surfaces safe and prevents chloride contamination in water bodies. Dakota County hosts Smart Salting Training at no cost to participants.

In the course, you will learn to:

• Reduce indoor and outdoor salt damage
• Use sustainable practices
• Manage liability and hidden costs of salt use on properties
• Look at winter maintenance strategies to discover improvement areas

New MS4 permit chloride requirements will be reviewed. Attendees can meet MPCA Level 1 Certification in Snow and Ice Control Best Practices. Certification is valid for two years. Session is online. Register by Sept. 30.